How to configure sonarr pointed to a network drive

#How to configure sonarr pointed to a network drive drivers
#How to configure sonarr pointed to a network drive manual
#How to configure sonarr pointed to a network drive Pc

The UEFI BIOS will show all hard drives that are connected correctly and detected by the system. If the drive still isnвЂ™t showing up and all the connections are secure, try plugging the SATA data cable into a different port on the motherboard. Double-check all of the connections, boot into the BIOS and check again. If the drive isnвЂ™t listed, shut down your PC. If all of your drive controllers are enabled and the drive is properly connected (and functional), it should be listed in the BIOS. In the BIOS, go to the standard System Settings menu or the Integrated Peripherals > SATA menu to see all of the drives installed in the system.

#How to configure sonarr pointed to a network drive manual

Usually, your system will display a message along the lines of вЂњPress DEL to enter Setup.вЂќ Consult your motherboardвЂ™s manual for the correct key. You can usually access the BIOS/UEFI by pressing the DEL or F2 keys right after powering up the system. Once youвЂ™ve mounted and connected the drive, power up your system and enter the BIOS/UEFI. As long as you donвЂ™t force it, thereвЂ™s really no way to mess it up. The SATA power cable from your PSU, like the SATA data cable, is keyed to fit onto the drive one-way. When youвЂ™re done connecting the SATA cable, youвЂ™ll have to connect the drive to your power supply unit (PSU). The connector is keyed to fit only one way. The SATA power cable connection looks similar to the data cable, but is longer. Most SATA 3 (6-gigabit)-compliant cables will usually come with the clips. Try to find SATA cables with metal retention clips, because they help keep the connectors secured.

#How to configure sonarr pointed to a network drive Pc

Physically mounting the hard drive in a PC is probably the most difficult part of the installation process. Some enthusiast-class also cases give users the ability to remove drive cages or to mount them in different positions to optimize air flow and simplify cable management. In enthusiast-class cases, itвЂ™s becoming more common to see the driveвЂ™s connectors facing the right side, making it easier to route and hide cables behind the motherboard tray. In mainstream cases, drive connectors will typically point to the rear.

#How to configure sonarr pointed to a network drive drivers

Magnet-tipped screw drivers can help keep you from dropping screws in difficult-to-reach places. Screws are the best way to secure your hard drive into your caseвЂ™s drive cage. The most common location is at the lower front, near the intake fans and away from other components.В Drive cages/bays will most often be mounted perpendicular to the bottom of the chassis, while drives mounted in the cages usually sit parallel to the bottom of the case.

Placement and orientation of the cages or bays will vary from case to case. Internal 3.5-inch hard disk drives are typically mounted in a drive cage or in an available drive bay. Now letвЂ™s get this hard drive installed in your computer.

WD Black: 1TB for $70, 2TB for $100, 8TB for $250, more sizes available.

Toshiba X300: 4TB for $95, more sizes available.

Seagate BarraCuda: 2TB for $55, 4TB for $90, 8TB for $140, more sizes available.